Jefferson Kitchen Range
Free Quotes • The Framed Doors • 5-Year Guarantee
0115-824-4201
Jefferson is our framed, shaker-style kitchen - a five-piece door with a recessed centre panel, built and hand-painted by our own joiners rather than bought in pre-finished from a factory. If you've been comparing kitchen fitters across Nottingham, the wider Nottinghamshire area or further out towards Wakefield, the quickest way to know whether the design suits your kitchen is a free home visit rather than a photo on a screen: door reveals, wall lines and the way light hits a painted frame all read differently in your own room than they do in a showroom.We're a family-run business that's been designing and fitting kitchens across Nottingham and the East Midlands for over 20 years, with 800-plus completed kitchens behind us, so a painted frame-and-panel kitchen like this is routine work for our joiners rather than a special order. If the classic shaker look isn't quite what you pictured, it's worth comparing it at the same consultation against our Strada range, which drops the frame for a flat, handleless slab door - seeing both side by side in CAD, against your own kitchen's dimensions, usually settles the decision faster than scrolling between two web pages.
The frame-and-panel build, and what else is included
- Five-piece framed doors and drawer fronts built to your measurements, not off-the-shelf stock sizes, with the recessed centre panel and corner joints cut and assembled by hand
- Free home consultation and measure-up, plus a CAD floor plan so you can see the frame-and-panel design in your own kitchen before ordering
- In-house spray finishing using airless equipment and dust-free mobile extraction, with colour matched precisely against palettes such as Little Greene or Farrow & Ball rather than a fixed swatch card
- Scribe strips and filler panels cut on site to close gaps against uneven or out-of-square walls, common in older Nottingham properties
- Worktop supply and fitting, including granite, quartz, marble or sintered surfaces such as Dekton, laser-templated and cut in-house
- Plumbing integration for sinks, taps and appliances, carried out by NVQ Level 2 and City & Guilds certified plumbers
- Electrical infrastructure - sockets, under-cabinet lighting, cooker circuits - installed by Part P approved electricians with safety certification issued on completion
- Gas Safe registered engineers to disconnect, reposition and commission gas hobs or range cookers
- Plastering and making good around the new units, and removal of the old kitchen under our registered waste carrier licence
- One point of contact project-managing every trade, plus a written installation warranty and formal sign-off once it's finished
Not Included / Costed Separately
- Structural work such as knocking through walls or extending the kitchen footprint - we can arrange this, but it's quoted and scheduled as a separate job
- Flooring outside the kitchen, and usually the kitchen floor covering itself, unless it's agreed at the design stage
- Large appliances aren't automatically bundled into the headline price - we'll fit ones you already own or supply new as part of the project, whichever suits, confirmed at quote stage
- Finance costs - flexible finance is available through an FCA-regulated partner, subject to status, but interest and terms sit outside the base kitchen price
- Extra travel time for addresses well beyond our usual Nottinghamshire and Derbyshire radius, including Wakefield, Sheffield and York - we still cover these, but scheduling is agreed at enquiry rather than assumed to match a local job
Turning frame-and-panel joinery into a fitted kitchen
- Enquiry and home visit: You get in touch with roughly what you're after, and we arrange a home visit rather than asking you to describe the room over the phone - wall lengths, door reveals, floor level and how the light falls all affect how a painted frame sits once it's in place.
- CAD design and written quote: We put your kitchen into our interactive floor-planning software so you can see a photo-realistic version of the layout before spending anything, then follow it with a full written quotation - materials, worktop, trades and fitting all itemised.
- Joinery and paint finishing: Once you sign off the design, the frame-and-panel doors and drawer fronts are built to your exact measurements and then sprayed in-house using airless equipment and dust-free extraction - this stage adds lead time compared with a pre-finished slab door, because painting happens after the joinery, not before.
- Old kitchen out, trades in: Old units and worktops are stripped out and removed under our registered waste carrier licence, then plumbing and electrical first-fix work goes in, followed by cabinetry, worktop fitting, and plastering to make good around the new units.
- Gas connection, snagging and sign-off: Where a gas hob or range cooker is involved, a Gas Safe registered engineer connects and commissions it. We then walk the finished kitchen with you, deal with any snagging on the spot, and hand over the written installation warranty - 5 years on labour and installation, 2 years on products.
Pricing a kitchen with hand-built, hand-painted doors
Our kitchens generally start from around £5,000, and a framed, painted range like this sits within that same bracket rather than a separate price bracket of its own - what moves the number is the size of your kitchen, the worktop material you choose, and how much plumbing, electrical and gas work is involved, not the door style itself. As a general market reference, UK fitted kitchens at the budget-to-mid end are commonly quoted between roughly £6,200 and £16,800 according to Checkatrade's 2026 figures, though that's an industry benchmark rather than a price we've set for this specific range, and it can sit above or below our own starting figure depending on scope. The painted finish itself doesn't usually push the price up on its own, since spraying happens in-house rather than being outsourced, but the extra manufacturing lead time it adds is
worth factoring into your timeline. The only reliable way to get a number that means anything for your kitchen is a site visit - we measure, talk through worktop and appliance choices, and put together a written quote with nothing left to guess at later. Flexible finance is available through an FCA-regulated partner, subject to status, if spreading the cost suits you better than paying up front.
Framed shaker against the alternatives
| Jefferson (framed shaker) | Strada (handleless) | Flat-pack self-fit | |
|---|---|---|---|
| Door construction | Solid frame-and-panel doors, hand-built and sprayed by our joiners | Flat slab doors with integrated pull, same in-house build | Machine-cut laminated MDF panels, stock sizes |
| Finish | Painted in-house, colour matched to palettes such as Little Greene or Farrow & Ball | Factory-applied finish, same in-house build team | Fixed factory laminate, limited colour range |
| Look | Traditional, works with period features like exposed brick or original skirting | Contemporary, minimal sightlines | Whatever the catalogue offers that year |
| Made to measure | Yes, built to your kitchen's exact dimensions, with scribe panels for uneven walls | Yes | No - fitted around standard cabinet widths, gaps filled with filler panels |
| Who fits it | Our own City & Guilds trained joiners, plumbers, electricians and Gas Safe engineers | Same in-house team | Self-assembly, or a separate fitter you source and coordinate yourself |
| Warranty | 5-year labour and installation, 2-year product | 5-year labour and installation, 2-year product | Manufacturer's product warranty only - no fitting guarantee |
| Starting price | From around £5,000, confirmed at site visit | From around £5,000, confirmed at site visit | Lower upfront, but design and fitting aren't included |
Where painted frame-and-panel joinery can go wrong, and how we prevent it
A frame-and-panel door is built from separate lengths of timber joined at the corners around a floating centre panel, rather than cut from one flat board, and that construction is exactly where a painted shaker kitchen can let you down if the joinery isn't tight. If a corner joint moves even slightly with seasonal humidity, the paint film tends to crack along that joint line before it shows anywhere else on the door - something a flat slab door simply doesn't have to contend with, because there's no joint there to move. Our joiners cut and assemble every frame in-house, and the same team sprays it afterwards using airless equipment and dust-free extraction, so the door never leaves the workshop to be finished by a separate paint shop where it could pick up damage in transit or lose
the colour match. That in-house link between joinery and finishing is also how we can match paint precisely to palettes such as Little Greene or Farrow & Ball rather than working from a fixed swatch card. On older Nottingham stock - the kind of property common around the Lace Market and Sneinton - walls and corners are rarely square, and a stock-sized shaker door shows every millimetre of that unevenness at its visible frame edge; ours are built to your measurements with scribe strips cut on site to close those gaps cleanly, rather than hidden behind a generic filler panel. The 5-year labour and installation guarantee reflects that: on this style of door, it's the joinery and the hanging that carry the risk, so that's what the warranty is built around.
Fitting Jefferson kitchens around Nottingham's older streets and the wider region
Nottingham is where most of our Jefferson installations happen, and it's also where a framed, painted door tends to earn its keep - in older streets around the Lace Market and Sneinton, where uneven Victorian walls and the sandstone caves and cellars running under parts of the city can leave floors and corners slightly out of true, a made-to-measure frame with scribe strips copes with that far better than a stock-sized door ever could. Across the river in West Bridgford, and out along the tram corridor through Beeston toward Clifton, we're regularly on site fitting and handling snagging visits, all run out of the same regional workshop that builds your doors. Wollaton is another area where the style suits the housing stock - a shaker door with a painted frame reads as classic-meets-contemporary in the way a lot of
buyers near Wollaton Hall are after. Arnold and the rest of Nottinghamshire out to Mansfield, Kirkby-in-Ashfield and Stapleford sit within our usual radius too, as does Derbyshire as far as Derby, Long Eaton, Alfreton, Heanor and Chesterfield. We also take on Jefferson installations further out in Wakefield, Sheffield and York; those sit outside our normal 15-to-20-mile radius, so scheduling for a job that far from the workshop gets worked out with you at enquiry stage rather than assumed to match a local timetable.
Got Questions?
Frequently Asked Questions
What style is this kitchen range?
It's a framed, shaker-style kitchen - a five-piece door with a solid outer frame and a recessed centre panel, rather than a flat slab. It's the traditional end of our cabinetry range, and tends to suit period properties or anyone who wants a kitchen that still reads as a proper shaker design up close, not just from across the room.
How is the frame and panel put together, and why does it matter?
Each door has a solid outer frame joined at the corners with a recessed panel set into the middle - traditional cabinet-making joinery rather than a door cut from one flat board. It matters because any unevenness in the joints or the paint finish shows up far more on a profiled shaker door than it would on a flat slab, so the standard of the joinery has more effect on how the finished kitchen looks than it does on some other ranges. Our carpentry is done in-house by City & Guilds trained joiners, so the same standard applies whether it's a single unit or a full run.
What are the doors made from?
The doors are built using frame-and-panel joinery rather than a single moulded slab, generally finished in paint for the classic shaker look. Exact specification is confirmed at the design consultation, because it's built to order rather than pulled from stock.
What colour options do I have for the doors?
Because we handle our own painted finishing in-house, colours can be matched precisely against premium palettes such as Little Greene or Farrow & Ball rather than being limited to a fixed swatch card. Bring a colour reference to your consultation and we'll confirm what's achievable.
How much does a kitchen like this cost to install?
Our kitchens start from around £5,000, and this range sits within that same bracket rather than carrying a separate price tag - the final figure depends on kitchen size, worktop choice and how much plumbing, electrical and gas work is needed. We won't give you an accurate number without seeing the room, which is why the home visit and written quote are free.
How long does it take from order to a finished kitchen?
Because the doors and cabinetry are built to your measurements and then painted in-house rather than taken off a shelf, there's a manufacturing lead time before fitting even starts - painting adds time on top of joinery compared with a pre-finished slab door - and the fitting itself depends on the size of the kitchen and how many trades are involved. We'll give you a realistic start-to-finish timeline once the design and quote are agreed, rather than a generic figure.
Can integrated appliances work with this design?
Yes - appliance positions are planned into the CAD design before anything is ordered, so ovens, hobs and integrated fridges or dishwashers sit flush within the cabinetry rather than being an afterthought. Gas hobs or range cookers are connected and commissioned by our Gas Safe registered engineers as part of the same project.
How does the painted finish hold up after a few years of use?
Honestly, it depends partly on upkeep - painted frame-and-panel doors show wear at handle points and hinge edges before a flat slab door would, particularly around a sink or hob where hands and moisture meet the paint most often. We're happy to talk through real examples from past jobs at your consultation rather than just showing brochure images, which is part of why we back the installation with a 5-year labour and 2-year product guarantee rather than leaving you to find out the hard way.
Book your free measure-up and quote
A framed kitchen like this is built to your measurements once you order it, so the earlier you get a proper measure-up done, the sooner you're working with real dimensions and a real price instead of guesswork. The home visit, CAD design and written quote cost nothing and commit you to nothing - get in touch and we'll get a date in the diary.
Free Quotes • The framed doors • 5-Year Guarantee
Quick Free Estimate - No Obligation
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.