Kitchen Door Hardware Nottingham
Free Consultation
0115-824-4201
If your kitchen doors are sound but the handles look dated, the hinges have gone loose, or a drawer grinds instead of gliding, you don't need a new kitchen - you need the hardware sorting. This covers new handles and knobs, hinge replacement or upgrades to soft-close, and drawer runner swaps, right through to fixing doors that have dropped or won't close square. It's a smaller, faster job than a full kitchen installation, but it's still done by the same City & Guilds trained cabinet makers who fit full kitchens, and it's backed by the same guarantee.
Most hardware jobs are booked and finished within a week or two of the first enquiry, with a written quote agreed before anything is fitted so there's no guessing on price.
What's Covered in a Kitchen Door Hardware Job
- New handles and knobs fitted in your chosen finish, sized correctly for your door and drawer widths
- Hinge replacement or upgrade, including switching standard hinges for soft-close or concealed types
- Drawer runner replacement, including heavy-duty runners rated for pan and cutlery drawers
- Specialty mechanisms such as bi-fold hinges, pocket door slides and corner pull-out carousels
- Pull-out bin, spice rack and tall larder unit fittings
- Adjustment of doors that have dropped, warped slightly or won't close square, without replacing the doors themselves
- Retrofitting new hardware onto your existing cupboards
- A measuring and sizing check if you're not sure of your current handle centres
- A written quote before anything is booked, so there's no guessing on price
Not Included / Costed Separately
- Replacing cabinet carcasses or doors that are too warped, rotten or damaged for hardware alone to fix - that becomes a cabinetry job rather than a hardware visit
- New worktops or stone surfaces, which are handled separately as part of the work-surface service
- Repainting or respraying doors that are structurally sound but tired-looking - that's a separate respray service, not a hardware fit
- Plumbing, electrical or gas work needed for appliance changes, which only applies if you're booking a wider kitchen project
- Call-outs well beyond the usual 15-20 mile radius from the workshop, which may need travel costs quoting separately
How a Hardware Upgrade Gets Booked and Fitted
- Get in touch -- Call or enquire about what's bothering you - slamming doors, dated handles, a drawer that won't run smooth. A rough idea of your kitchen's size and current hardware helps with early advice.
- Free consultation and quote -- Doors, drawers and hinges get measured up and finish samples shown, either at your home or the showroom off Derby Road. You get a written quote before anything is booked.
- Booking -- Most hardware-only jobs are booked in within a week of the quote being agreed.
- Fitting day -- Handles, hinges, drawer runners and any specialty mechanisms are fitted and adjusted on site - typically 3-5 hours for a full kitchen, sometimes stretching to a full day where doors need adjusting for warping or a sloping floor.
- Testing and sign-off -- Every door and drawer gets checked for smooth, quiet closing before the job's called finished, backed by the 5-year guarantee on labour and installation.
What Handles, Hinges and Runners Cost
Handles alone start from around £60 for a small run of cupboards, and a full kitchen's worth of handles, hinges and drawer runners together usually comes to a few hundred pounds rather than thousands, depending on finish and how many drawers need heavy-duty runners rather than standard ones. Soft-close hinge upgrades and specialty fittings such as pocket door slides or corner carousels add to that. These are ballpark figures - an exact price depends on how many doors and drawers you have, the finish you want, and whether any doors need adjusting for a dropped hinge or an out-of-square carcass, so a full written quote needs a short home visit or a look at some photos first.
Hardware Refresh or Full Kitchen Replacement?
| Factor | Hardware Refresh | Full Kitchen Replacement |
|---|---|---|
| Best when... | Cabinets and doors are sound, just dated or worn fittings | Carcasses are damaged, the layout doesn't work, or you want a different style |
| Typical cost | From around £60 for handles alone, up to a few hundred pounds for handles, hinges and runners across a whole kitchen | From around £5,000, with flexible finance available through an FCA-regulated partner, subject to status |
| Time on site | Usually 3-5 hours, often finished in a day | Several weeks, coordinating joinery, plumbing, electrics and plastering |
| What you get | Smoother, quieter doors and drawers and an updated look | A new layout and cabinetry, designed in CAD so you see it before committing |
Diagnosing the Problem, Not Just Swapping Parts
A door that won't sit square is rarely just a bad hinge - more often it's a carcass that's shifted a fraction, hinges over-tightened by an earlier DIY fix, or a cabinet run that was never quite level to start with. Working out which one you've actually got, rather than swapping parts and hoping it settles, is what City & Guilds trained cabinet makers bring to a job that looks simple from the outside. Every handle, hinge and runner fitted carries the same 5-year guarantee on labour and installation, and 2-year guarantee on products, that backs a full kitchen refit, and the person who quotes the job is the one who turns up to fit it. Kitchens have been designed and fitted this way across Nottingham and the wider East Midlands for over 20 years, with more than 800 completed for local homeowners, so a hardware call-out gets the same standard of fitting as a full project rather than being squeezed in as an afterthought.
Where We Fit Kitchen Door Hardware
Nottingham is the base for hardware call-outs, and the same fitting team runs regular jobs out across Nottinghamshire too - Mansfield, Kirkby-in-Ashfield and Stapleford are all common bookings, with Derbyshire visits to Derby and Long Eaton fitting comfortably into a normal working day. What a hardware job actually involves tends to track the age of the house more than the postcode: Victorian and Edwardian terraces around the Lace Market and Sneinton usually sit on suspended timber floors that have crept out of level over a century, so a hinge or runner replacement in one of those houses often needs the carcass re-levelled first, or a couple of the hinge fixing points re-drilled and plugged before new hardware sits flush - a straight handle swap turns into a half-hour of extra levelling work more often than not. Newer builds and city-centre apartments near the Creative Quarter tend to sit square from the start, so the same call-out is usually a quicker job: standard hinges upgraded to soft-close, or worn runners swapped for heavier-rated ones under a pan drawer. Jobs further into Derbyshire, toward Alfreton, Heanor or the Chesterfield side of the border, still sit inside the usual 15-20 mile radius from the workshop - flagging that distance at enquiry stage just helps plan the fitting day around the extra travel time.
Kitchen Door Hardware Questions
Can you match new handles to my existing kitchen without replacing the doors?
Yes - most handle and knob changes are a straightforward swap as long as the new hardware covers or matches the existing fixing holes, or we can re-drill and fill neatly where the hole spacing is different. We'll check your current handle centres as part of the quote so there's no surprise on the day.
My drawers slam shut or won't close properly - is that a hardware fix?
Usually, yes. Drawers that slam are almost always down to worn or missing soft-close runners, and drawers that won't close square are often a runner that's come loose or slightly bent rather than a fault with the drawer itself. Both are typically a runner replacement rather than a new drawer box.
How long does a full kitchen's hardware take to fit?
Most full kitchens take 3-5 hours for handles, hinges and runners across every door and drawer. It can stretch to a full day if several doors need adjusting for warping, a dropped hinge or a sloping floor, which is more common in older properties.
Do you fit hardware on kitchens you didn't originally install?
Yes, retrofitting new hardware onto someone else's cabinets is one of the most common hardware jobs we do. As long as the carcasses and doors themselves are sound, the brand or age of the original kitchen doesn't matter.
What if my cabinet doors are too warped for new hinges to fix?
If a door has genuinely warped rather than just dropped on its hinges, no amount of hinge adjustment will get it sitting flush - that's a cabinetry repair or replacement job, not a hardware one, and we'll say so honestly at the quote stage rather than fitting parts that won't solve it.
Can you upgrade standard hinges to soft-close without replacing the doors?
In most cases yes, soft-close hinges are fitted to the same door using the same or compatible fixing points. Some older or non-standard hinge cups may need a small amount of adaptation, which we'll flag before booking if it applies to your kitchen.
Do you supply the handles and hinges, or do I need to buy them myself?
We can supply hardware in a range of finishes, or fit hardware you've already bought yourself - either way works, so just let us know which you'd prefer when you enquire so the quote reflects it correctly.
Is there a minimum job size for a hardware call-out?
No - we fit anything from a single replacement handle to a full kitchen's worth of hinges and runners. Smaller jobs are quoted the same way as larger ones, with a written price agreed before anything is booked.
Is there a minimum job size for a hardware call-out?
No - we fit anything from a single replacement handle to a full kitchen's worth of hinges and runners. Smaller jobs are quoted the same way as larger ones, with a written price agreed before anything is booked.
Don't Let a Sagging Door Wait
A door that's dropped or a drawer that sticks tends to get worse, not better, and it's a small job to put right compared with a full refit. Book a free consultation, get a written quote with no hidden extras, and in most cases you'll have new hardware fitted within the week - backed by a 5-year guarantee on labour and installation.
Nottingham Kitchen Fitter
Call 0115-647-4643
5-Year Guarantee • City & Guilds Trained • Free Quotes
Quick Free Estimate - No Obligation
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.