Kitchen Worktop Installation in Nottingham
In-House Team • 20 Years' Experience • Free Quotes
0115-824-4201
A tired, stained or badly-joined worktop is often the one thing holding back an otherwise decent kitchen, and swapping it for stone or an engineered surface changes the whole room's feel almost overnight. Worktop work sits alongside cabinetry and respraying as one of the three trades we run ourselves rather than pass to a subcontractor, covering granite, high-character Italian marble, quartz, and tough sintered surfaces such as Corian and Dekton. Anyone still weighing up materials before deciding might find our kitchen worktops page a useful starting point for working through the options.
Each surface is measured with a digital laser template rather than a tape measure, cut on our own equipment, then fitted and jointed by our in-house masonry team -- a step that matters more than it sounds, because a slab cut to a slightly-off measurement shows up later as a gap against the wall or a joint that never quite closes flush.
What A Worktop Installation Includes
- Digital laser templating to capture exact wall lines, corners and appliance gaps before a single cut is made
- In-house cutting of granite, Italian marble, quartz, and sintered surfaces such as Corian and Dekton
- Removal and legal disposal of your old worktop under our registered waste carrier licence
- Precision jointing by our own masonry team, including mitred corners and near-invisible run joins
- Sink, hob and tap cut-outs, with reconnection carried out by our own NVQ Level 2 and City & Guilds certified plumbers
- Coordination with Part P approved electricians and Gas Safe registered engineers wherever a hob or appliance needs disconnecting and refitting
Not Included / Costed Separately
- Replacing or altering the cabinets and carcasses the worktop sits on -- that gets priced and scoped separately as part of a fuller kitchen project
- Structural wall work, such as knocking through to open up a kitchen-diner, which needs its own building consent and a separate quotation
- Supplying the sink, tap or hob itself, unless you'd like us to source these as part of the job
- Re-plastering or redecorating around the new surface -- this can be added to the job, but it isn't part of the core installation price
What Happens Between Booking And Fitting Day
- Free home visit and design -- We come out to look at the kitchen, talk through material options, and use our CAD and interactive floor-planning software so you get a rough photo-realistic idea of the finished worktop before agreeing anything.
- Written quotation and agreement -- You're given a full, no-obligation written quote with no hidden extras, along with a transparent agreement setting out the scope of work before a date is booked.
- Laser templating -- Once a material is chosen, we return to template the space digitally, picking up every wall, corner and cut-out so the slab is cut to the room as it actually is, not to the original drawings.
- In-house cutting and jointing -- The chosen stone or engineered surface is cut to the template on our own equipment, edges are profiled, and joints are prepared ready for fitting.
- Fitting day -- The old worktop is removed under our registered waste carrier licence, the new one is fitted and jointed by our own team, and any sink, tap or hob reconnection is handled by our plumbers, electricians or Gas Safe engineers as needed.
- Sign-off and warranty -- We walk through the finished job with you, hand over a formal sign-off, and back the work with a written installation warranty.
What Affects The Cost Of A New Worktop
Pricing on a worktop job comes down mostly to material: granite and Italian marble sit at the premium end, quartz is a popular mid-range choice because it needs so little upkeep, and sintered surfaces like Corian and Dekton cost more but shrug off heat and scratches better than the rest. On top of that, the length and shape of the run, how many joints and cut-outs are needed, and whether the cabinets need any adjustment to take the new surface all move the final figure. As a rough guide, a full kitchen project through us starts from around £5,000, though a worktop-only replacement is usually a smaller job than that on its own.
The only reliable way to get a firm figure is a free home visit, since two kitchens of similar size can price quite differently depending on material choice and how easy the site is to work in. Finance is also available through an FCA-regulated partner, subject to status, for anyone who'd rather spread the cost.
Granite, Marble, Quartz Or Sintered Stone -- Side By Side
| Material | Look | Day-to-day durability | Best suited to |
|---|---|---|---|
| Granite | Natural stone, unique veining and flecking in every slab | Heat and scratch resistant, benefits from occasional resealing | Traditional and Shaker-style kitchens wanting a natural finish |
| Italian marble | High-character veining, a premium period-appropriate look | Softer than granite, more prone to staining and etching from acidic spills | Character kitchens where looks come first, such as older city conversions |
| Quartz | Engineered, consistent pattern and colour along the whole run | Low maintenance, no sealing needed, resists staining well | Busy family kitchens wanting a hard-wearing surface |
| Corian / Dekton (sintered) | Ultra-modern, can be jointed almost invisibly | Extremely tough, highly heat and impact resistant | Handleless, contemporary kitchens and heavy-use worktops |
Why We Insist On Seeing The Actual Slab Before We Cut
Natural stone doesn't behave like a manufactured product -- two granite or marble slabs from the same quarry can still carry completely different veining, and a run that crosses a joint only reads as one continuous surface if the pattern either side is matched before the saw touches it. That's one reason we do our own cutting rather than send a template off to a stone yard and take whatever comes back: our masons lay the slab against the template first, check how the grain runs across the join, and turn or flip the piece where it helps the pattern flow rather than jar at the seam. It's a step that's easy to skip on a rushed job, and it's usually the difference between a worktop that reads as one piece of stone and one where the eye goes straight to the joint.
We're not a national chain passing your kitchen between subcontractors -- the same people who template your worktop are the ones who cut and fit it, and every finished job is backed by a written installation warranty. For the fuller picture of how worktop work fits into a wider kitchen project, our Nottingham Kitchen Fitter homepage covers the design and project-management side too.
Areas We Cover For Worktop Templating And Fitting
Most of our worktop jobs are in Nottingham itself and the surrounding suburbs -- West Bridgford, Wollaton, Beeston, Arnold and Sneinton -- with others heading further out into Nottinghamshire towns like Mansfield, Kirkby-in-Ashfield and Stapleford, and across into Derbyshire as far as Derby, Long Eaton, Alfreton and Heanor, plus the occasional job up toward Chesterfield. Near Wollaton Hall, where period and traditional-style kitchens are common, granite and marble tend to be the materials people ask for; in newer builds elsewhere in the city it's usually quartz or a sintered surface. We also take on the odd job further into South and West Yorkshire -- Sheffield, Wakefield, York -- though that sits outside our usual working radius, so it's worth checking availability first if you're calling from further out.
Worktop Installation Questions We're Asked Most
How long does a worktop replacement actually take?
Templating is a separate visit from fitting, and stone is cut to order once the template's confirmed, so expect roughly one to three weeks between the templating visit and fitting day depending on the material and how busy the workshop is. The fitting itself is often done in a single day for a straightforward run; more joints, cut-outs or a larger kitchen can push that to two.
Can you fit a new worktop without replacing my existing cabinets?
Yes, provided the cabinets underneath are sound, level and in good enough condition to take the new surface -- this is one of the more common jobs we do. If the carcasses are out of level or damaged, we'll flag that at the home visit, since a new worktop fitted onto an uneven base won't sit or joint properly.
Do I need to be home for the laser templating visit?
You don't have to be present for the whole visit, but someone needs to give us access to the kitchen and ideally be reachable in case a decision's needed on-site, such as confirming an overhang or edge detail before it's locked into the template.
What happens to my old worktop?
We remove and dispose of it as part of the job, under our registered waste carrier licence, so it's taken away legally rather than left for you to sort out.
Can you match the overhang and edge profile of my existing worktop?
In most cases, yes -- that's part of what the templating visit is for. If you want a specific edge profile (bullnose, chamfered, square) or a particular overhang for stools or a breakfast bar, tell us at the design stage so it's built into the template rather than adjusted afterwards.
Will my hob and sink need to be disconnected and refitted?
Yes, if they sit within the worktop being replaced. Our own plumbers handle sink and tap reconnection, and we coordinate Part P approved electricians and Gas Safe registered engineers for hob disconnection and recommissioning, so it's covered within the same job rather than something you need to arrange separately.
My house is older and the walls aren't square -- is that a problem?
It's common in older Nottingham housing stock and it's exactly what digital templating is designed to catch. Rather than cutting to the drawn dimensions, we template the room as it actually is, out-of-square walls included, so the finished worktop sits tight against the wall rather than gapping at one end.
Is there a minimum size job you'll take on for a worktop-only replacement?
No fixed minimum, but very small jobs (a single short run, for example) may carry a higher effective cost per metre once templating and a site visit are factored in -- we'll be upfront about that at quotation stage rather than let you find out afterwards.
Which material should I choose if I'm not sure?
It depends on how you use the kitchen and what you want it to look like -- granite and marble for natural character, quartz for low maintenance, Corian or Dekton if you want maximum toughness and near-invisible joints. The comparison above is a starting point, but seeing samples against your own cabinets at the home visit is the better way to decide.
In-House Team • 20 Years' Experience • Free Quotes
Quick Free Estimate - No Obligation
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.